Amazon FBA Storage Fee Calculator

Convert packed dimensions in inches to cubic feet and estimate Amazon FBA storage with editable seasonal rates.

How to calculate amazon fba storage fee

  1. Amazon FBA storage planning begins with the volume of the packaged inventory stored in a fulfillment center. Enter length, width and height in inches for one sellable unit, including its required packaging. Multiplying those dimensions gives cubic inches. Dividing by 1,728 converts the result to cubic feet because a cubic foot contains twelve inches in each of three directions. This is a volume conversion, not a shipping weight calculation.
  2. The calculator multiplies per-unit volume by your average stored unit count, then by a monthly dollar rate per cubic foot. You can select standard or oversize and January through September or October through December to load example assumptions. These presets could not be verified from the reviewed official pricing page and must be treated as editable illustrations, not an Amazon fee quote. Your billed size tier must come from your account.
  3. The monthly result is multiplied by the number of whole months entered at the same rate. This assumes unchanged average inventory and a single applicable seasonal rate across the period. Split a period that crosses September into separate calculations. The output does not include fulfillment fees, inbound placement charges, aged inventory surcharges, utilization surcharges, removal fees or dangerous-goods pricing. It estimates only the basic storage expense represented by your chosen rate.

Formula: unitCube = length * width * height / 1728; totalCube = unitCube * averageUnits; monthlyStorage = totalCube * monthlyRate; periodStorage = monthlyStorage * months

Formula

unitCube = length * width * height / 1728; totalCube = unitCube * averageUnits; monthlyStorage = totalCube * monthlyRate; periodStorage = monthlyStorage * months

Where:

Dollar inputs
= USD amounts on the same transaction or period basis described above
Percent inputs
= Editable percentage points, divided by 100 for calculation

Worked example

A packaged unit measuring 12 by 12 by 12 inches occupies exactly 1 cubic foot. With 100 average units in storage, total modeled volume is 100 cubic feet. Using the editable $0.78 monthly rate gives $78 per month. Three months at that unchanged rate and inventory level produce an estimated $234 storage cost.

A smaller package measuring 12 by 12 by 6 inches occupies 0.5 cubic feet. Twenty average units therefore use 10 cubic feet. At an illustrative peak-season rate of $2.40 per cubic foot per month, the estimate is $24 for one month. That amount excludes every surcharge and service outside the basic volume-based calculation.

Planning packaged FBA inventory by season

Build a storage budget from packed measurements rather than an unboxed product specification. Protective packaging can increase volume substantially even when it adds little weight. Verify that each dimension represents the sellable unit as received, and compare a small sample with the dimensions in your account report. A dimensional discrepancy repeated over hundreds of units can matter more than a small change in the monthly rate.

Use the monthly output to compare a large replenishment with smaller shipments, but keep inbound and stockout costs in a separate worksheet. Lower storage expense does not automatically mean higher total profit if frequent restocking increases freight or causes lost sales. During peak months, revisit both the average unit count and the rate rather than changing only the season selector and assuming the inventory forecast is still appropriate.

Frequently asked questions

A foot is twelve inches, so one cubic foot is twelve times twelve times twelve cubic inches. Dividing the product of three inch dimensions by 1,728 changes units without rounding. Entering centimeter measurements into fields labeled inches would give the wrong volume even if the dimensions look reasonable.

Related calculators

Illustrative US estimate only. Verify account-specific rates, fee bases and eligibility with the provider. Editable defaults are not guarantees. Taxes and unlisted charges are excluded.